AMA: My 2024 Ranger Raptor is Delivered! First Impressions 🔥🔥

[IPumpFe]

I called ford corporate to get info on my build. Someone from ford marketing notified me that I had a rebate but they couldn’t see what it was till I got my vin. When I received my vin I called back and they said it was a $1k rebate attached to my order. I got the certificate number for the rebate from ford corporate and then gave that to my dealer and they applied it to my order.

Just got off the phone with Ford inquiring about the discount. They told me they show no discounts on my order and suggested it could be a regional offer, not available to me (?). I'm not shocked, the only consistent thing about communications with Ford (probably all majors) is inconsistency. My story is similar to others - submitted order the day the banks opened; order changed from Stock to Retail after Ford guidance. Raptor was completed yesterday and is awaiting carrier pick-up.
Is there some criteria about the discount I'm missing? Thanks!

Sponsored

 

[HighDesertRanger]

CONGRATS!!! Beautiful truck!

 

[RangerFly]

Congrats, super cool R-Raptor!

 

[KevR]

Is Ford chat helpful for knowing whether or not you have a rebate or do you have to call Ford?

 

[gForceDude]

Just got off the phone with Ford inquiring about the discount. They told me they show no discounts on my order and suggested it could be a regional offer, not available to me (?). I'm not shocked, the only consistent thing about communications with Ford (probably all majors) is inconsistency. My story is similar to others - submitted order the day the banks opened; order changed from Stock to Retail after Ford guidance. Raptor was completed yesterday and is awaiting carrier pick-up.
Is there some criteria about the discount I'm missing? Thanks!

Here's a new thread about this Rebate:
https://www.ranger6g.com/forum/threads/1-000-factory-rebate-for-pre-order-customers.9228/

 

[gForceDude]

Is Ford chat helpful for knowing whether or not you have a rebate or do you have to call Ford?

Here's a new thread about this Rebate:
https://www.ranger6g.com/forum/threads/1-000-factory-rebate-for-pre-order-customers.9228/

 

[Hyperbolic_1]

I called ford corporate to get info on my build. Someone from ford marketing notified me that I had a rebate but they couldn’t see what it was till I got my vin. When I received my vin I called back and they said it was a $1k rebate attached to my order. I got the certificate number for the rebate from ford corporate and then gave that to my dealer and they applied it to my order.

As others have said, much appreciated on posting this very good info @Rangerraptr. One question...is the certificate number for the rebate unique to a VIN? If not, could you share the cert number you got to make it easier for the rest of us (w/ VINs and built trucks awaiting shipping) to give that number to our dealership to apply the same rebate. Thanks in advance!

 

[81stfacp]

Mine is supposed to arrive, sometime mid April. Is there a way sanitize (read remove) all the Raptor decals?

 

[yoopercharged]

Mine is supposed to arrive, sometime mid April. Is there a way sanitize (read remove) all the Raptor decals?

With a heat gun, hairdryer, or a couple hours in direct sunlight, they should pull off quite easily.

 

[81stfacp]

With a heat gun, hairdryer, or a couple hours in direct sunlight, they should pull off quite easily.

Sunlight should not be an issue in CenTex

Thank you.

 

[Rangerraptr]

As others have said, much appreciated on posting this very good info @Rangerraptr. One question...is the certificate number for the rebate unique to a VIN? If not, could you share the cert number you got to make it easier for the rest of us (w/ VINs and built trucks awaiting shipping) to give that number to our dealership to apply the same rebate. Thanks in advance!

You’re welcome! I am under the impression each certificate number is special for individual orders. Call the ford 1800 and get in touch with the marketing.

 

[mperezkr]

It has vents under seat, see pic and yes depends on front temp setting

When you push the R button you get the screen shown in other pic, but I need time time play with all the settings, but does seem like all those are preferred settings that can be set and entered with second push of R button it’s in the garage in accessory mode

Congrats

If you have time can you measure the height and width of the rear vents. Looking for something like this since we don't have rear vents.

Amazon.com: OXILAM Under Seat Vent Deflectors for Chevrolet Chevy Silverado and GMC Sierra 2014 2015 2016 2017 2018 2019, Rear AC Vent Directional Deflectors for Rear Passenger : Automotive

 

[cc1999]

Looks great!!!
Congratulations!!!
If you get a chance, I am looking for measurements between the bed rails at both ends of the bed the back of the cab and just in front of the tailgate.
Tring to figure out if my old Colorado rack and toolbox is going to fit my RR .

 

[Soperfect]

Congratulations
Enjoy.
If you don't mind, what was your build date?

Production date was 2/27 and built was 3/13; ordered July 2023

 

[Critical Habitat]

Looks great!!!
Congratulations!!!
If you get a chance, I am looking for measurements between the bed rails at both ends of the bed the back of the cab and just in front of the tailgate.
Tring to figure out if my old Colorado rack and toolbox is going to fit my RR .

There is some info here, posted from the bodybuilder manual. I also saved a copy for future reference and curiosity.
ranger6g.com/forum/attachments/2024-ranger-body-builders-layout-guide-pdf.39231/

Sponsored