Bigger tires no lift no rub. Thoughts.

[Williamg4x4]

there has been no rubbing at all in any situation.

Sponsored

 

[danmoochie]

there has been no rubbing at all in any situation.

Amazing. You have my exact truck and the tires I want on the same rims. Thank you so much for taking the time to confirm and send photo.

 

[danmoochie]

there has been no rubbing at all in any situation.

Btw how did you get black side walls? Every site I look at shoe only raised white letters which I hate ugh

 

[Williamg4x4]

The K03s are black on one side white on the other. Mine are installed white in black out.

 

[danmoochie]

The K03s are black on one side white on the other. Mine are installed white in black out.

Lolol ok I figured.

 

[stemplar]

…The 255s were horrible.

What? Did you mean to say that the stock Goodyears were horrible? Or did you actually mean to say that all 255’s are horrible? Lots of folks agree with the former and the latter is laughably absurd.

 

[Williamg4x4]

They just looked to small on the truck. And the trailer looking tred was just ugly. And to me the truck runs better with the K03s.

 

[danmoochie]

They just looked to small on the truck. And the trailer looking tred was just ugly. And to me the truck runs better with the K03s.

I have to agree with that. The stock tires seem to small. I love the stock rims so the only optional tire is the 265/70 and the KO3 tires square off and just that little height and width make a difference. Plus a much deeper thread depth. More rubber.

 

[AndresJ]

I think width should be OK. I think at lock stock I had a tiny bit of wiggle room still, so I think width is OK. Height wise is where I dont know, since a true 33 scrubs without new offset/spacers with the Dobs level (1.5"). It seems to me with spacers though a 33 would fit now.

Once upon a time, there was a Ford Ranger ORV Package with 33" in Raptor wheels... we probably won't see it again...

That's the key question, the offset to fit 32.5-33" without rubbing.

Coming back to the topic in hand, thank you @danmoochie for bringing this up and @Williamg4x4 to show us what to copy

Sponsored