3rd brake light chase lights

[RaptrJr]

Wanting to get chase lights for my RR preferably ones for the 3rd brake light area like the ones RPG, GJ Motorsports or Bulletproof Diesel offer. Anyone know if any of those will fit or any other options?

Sponsored

 

[AlpineBike]

This is the company that sets up the Ford Performance School trucks.

https://impulseoffroad.com/

Chase rack, spare tire mount, chase lights, front bull bar and light bar.

 

[mtesni]

GJ Motorsports 3rd Brake Chase setup works.

 

[Arsenall11]

Armidillo

 

[Machduty]

GJ Motorsports 3rd Brake Chase setup works.

How and where did you run the wires. They are local to me was thinking of picking one up.

 

[mtesni]

Ran the wires through the factory opening. I ran them to the right side making sure to avoid the airbag based on installation instructions for the F150's, I would not follow my lead on this haha... F150's have their BCM and Aux wiring leads under the dash on the passenger side which we do not have. I didn't feel like re routing so I just ran a wire from the passenger kick panel to the AUX 1 lead under hood for the chase lights. I'm trying to get the pinout for our BCM so I can enable the center light on reverse.

 

[Machduty]

Ran the wires through the factory opening. I ran them to the right side making sure to avoid the airbag based on installation instructions for the F150's, I would not follow my lead on this haha... F150's have their BCM and Aux wiring leads under the dash on the passenger side which we do not have. I didn't feel like re routing so I just ran a wire from the passenger kick panel to the AUX 1 lead under hood for the chase lights. I'm trying to get the pinout for our BCM so I can enable the center light on reverse.

Great thanks for the heads up I have the same setup on my superduty wish it was as simple to install.

 

[RedNose1]

Ran the wires through the factory opening. I ran them to the right side making sure to avoid the airbag based on installation instructions for the F150's, I would not follow my lead on this haha... F150's have their BCM and Aux wiring leads under the dash on the passenger side which we do not have. I didn't feel like re routing so I just ran a wire from the passenger kick panel to the AUX 1 lead under hood for the chase lights. I'm trying to get the pinout for our BCM so I can enable the center light on reverse.

Is this the F150 kit?

 

[mtesni]

Is this the F150 kit?

Yes, purchased from here: https://www.4x4truckleds.com/gj-mot...rd-f-150-2017-ford-super-duty-without-camera/

F-150 & Super Duty w/LED Factory Brake Light integration harness worked perfectly.

 

[Ford Motor Company]

GJ Motorsports 3rd Brake Chase setup works.

Nice job, Matt! Thanks for sharing with the community.

 

[Garaged]

Yes, purchased from here: https://www.4x4truckleds.com/gj-mot...rd-f-150-2017-ford-super-duty-without-camera/

F-150 & Super Duty w/LED Factory Brake Light integration harness worked perfectly.

What choices did you make for the three lights?

Also, as it stands now, without identifying BCM, do the little red dot lights still light up on braking?

 

[mtesni]

What choices did you make for the three lights?

Also, as it stands now, without identifying BCM, do the little red dot lights still light up on braking?

Went with Sport Wide Cornering in Amber for the outers and Sport Work/Scene for the inner one. The outers I wired up to the Aux 1 switch, inner takes the place of the factory cargo light. Once I figure out the BCM I'll also have it come on in Reverse. The three small lights function as brake lights. The brake lights and cargo light plug in using the integration harness that's included

 

[RedNose1]

Yes, purchased from here: https://www.4x4truckleds.com/gj-mot...rd-f-150-2017-ford-super-duty-without-camera/

F-150 & Super Duty w/LED Factory Brake Light integration harness worked perfectly.

Thanks for sharing, that will be my next upgrade after removing the canopy.

 

[RaptrJr]

GJ Motorsports 3rd Brake Chase setup works.

Awesome! I also spoke with RPG and their 2nd gen light will work as well. I’ll be going with either that or the GJ. Did you get a LVJ harness as well? If so I’m guessing the basic w/ reverse based on your other replies

 

[rwolfcastle]

This is what I'd like, but for the Ranger.

https://mpowerlights.com/product/mpower-orv-chase-light-kit/

I tried emailing them to see if they have any plans for it, but never got a response.

Sponsored