wires for trailer brake controller '24 Ranger?

[HWMTB]

I just ordered one of these: Curt Echo In-Line Bluetooth Brake Controller w/ OneControl App

I strongly dislike the idea of having to use a phone app and bluetooth technology to use a brake controller but this might be the only option if Ford can't get that BOO line activated. This Curt Echo seems to capture brake input from the 7-pin connector (Not sure how it filters out turn-signal inputs).

I thought I was saving money but this isn't worth the stress. LOL. I should have waiting and found a Ranger with the basic tow.

Sponsored

 

[Jason B]

We discussed this before, but according to eTrailer, I need kit ETBC7 to convert 4-pin to 7-pin.
It also says to hook up the red wire from the TBC to the cold side of the brake switch. I think that will work for activating the TBC with the brake pedal, but won't work for the AEB. Remember, though, there was no AEB in the past and people were fine towing.
At this point, I just want to add a hitch receiver and 7 pin. The TBC can come later. If I do, and Ford, eTrailer or Curt haven't found a simple solution, I will get the kit made for 19-23 Rangers (VKB3Z2C006A ) as it has a method to get the signal from the CHMSL to trigger the TBC in AEB situations. I wouldn't hook up the TBC directly to the CHMSL, as that might cause weird stuff to happen.

 

[DesertSand]

This should be the factory trailer brake module needed. It appearsyou with need 2 small harnesses, the controller and the bezel for the factory look and operation.

 

[DesertSand]

VR1WZ-19H332-A is the brake controller kit part number for the 2024+ ranger with the 7 pin with no controller. It is made by Lumin.

 

[ShadowDragon24]

Do you have Forscan? It would be interesting to do a dump of your asbuilt before and after the service visit.

I'm in the process of trying to add a tbc to my 25 xlt with the $500 factory tow. so far using this thread, I see I have the majority of the stuff. that plug Ill be looking for under the trm, but my cousin into the parts dept at my dealer said the trailer brake switch wasnt available to public yet, but he could order it for me, and so far using this thread, I've been finding part numbers and diagram on component locations to give to him.

I have my asbuilt downloaded from ford website. and once I find all the tbc items, and have the dealer install, Ill compare my asbuilt.

 

[ShadowDragon24]

This should be the factory trailer brake module needed. It appearsyou with need 2 small harnesses, the controller and the bezel for the factory look and operation.

what your calling the Trailer brake module, is what my truck is caling the trailer control module when I look at modules in forscan.(screenshot trying to attach) ill have to look in the easy configuration and see if the trailer brake is enabled already.

i've looked, but I havent changed anything yet. ill wait till after ford installs the trailer brake switch and that. but based on your post, and others. all I need is the dash trim, switch, and to hook into that capped off plug under the trm.

 

[DesertSand]

what your calling the Trailer brake module, is what my truck is caling the trailer control module when I look at modules in forscan.(screenshot trying to attach) ill have to look in the easy configuration and see if the trailer brake is enabled already.

i've looked, but I havent changed anything yet. ill wait till after ford installs the trailer brake switch and that. but based on your post, and others. all I need is the dash trim, switch, and to hook into that capped off plug under the trm.

I am hoping for that as well. All my 2014 f150 needed was the factory controller and to be added in at Ford. This new technology with advanced trailer with the controller in the new Ranger might have other "quirks" that might cause headaches when "turning on" the factory brake controller. Keep us posted!

 

[ShadowDragon24]

I am hoping for that as well. All my 2014 f150 needed was the factory controller and to be added in at Ford. This new technology with advanced trailer with the controller in the new Ranger might have other "quirks" that might cause headaches when "turning on" the factory brake controller. Keep us posted!

will do. idk why my screenshot didnt attach earlier. ill try now, but I havent seen if that capped off plug is there because its pouring rain. but like I said, my truck is shiwing the trm with the part # you said was the tbc module, and looks the same as my trm.

Ill also get my asbuilt data after they make changes.

I have a 25 xlt 2.3Ltr with fx4, tow and sport appearance packages added

Im also trying to add the heated mirrors off the lariat(minus the camera's and humidity sensor)

didnt realize they wernt heated till easter sunday. my 2012 escape xlt had heated, but my 2025 ranger xlt its an option? lol

dealer fucked up on delivery day. I was quoted and paid for winters on alloys for my second set of rims.... service dept used wrong quote # and put steelies in the pan. so thats being corrected. but my salesman is trying to get me the heated mirrors for free, or heavily discounted. I see the knockouts under the mirrors for the puddle lights and stuff. so they may just order the components I want/need. but thats a different post.

Once I get whats needed for the intragrated brake controller, and it all works, I will either make a post referenceing this thread, or update directly in here. it has the trailer menu on the dash, and all the trailer functions thus far work on my utility and I saw the trm behind the bcm. but didnt know about that mysterious plug below it. if I got that, seems like all I should need is dash switch, trim, and the harness to that plug if it thats all the cousin finds I need. I'll peak again in the easy config in forscan and see if any of the other trailer options are enabled on my laptop in a bit.

Sponsored