RPG Off-Road Ranger Raptor (US) Spring Perch Collar Kit - Adjustable & Static

[CherryCoke]

RPG Off-Road Ranger Raptor spring perch collar kit (US). Looks like they are approved both by Ford Performance & Fox.

Priced at $349

who's getting these?

https://www.rpgoffroad.com/product/24-ranger-raptor-adjustable-spring-perch-collar-kit/

Welcome to the RPG Off-Road ’24+ Ranger Raptor Adjustable Spring Perch Collar Kit!

If you’re looking to increase the ride height of your all new Ford Ranger Raptor, whether it be for better ground clearance on the trails or a meaner overall stance, RPG Off-Road has you covered with the Adjustable Spring Perch Collar Kit. Machined in-house in the USA out of 6061 Aluminum, these collars give you plenty of ride height increase adjustment so you can dial it in as you’d like. These adjustable spring perch collars will allow you to choose between 1.0″-3.5″ of ride height increase by simply using the correlating snap ring groove.

These collars can be used on both the front coilovers and the rear coilovers. So far, we’ve seen that the Ranger Raptor needs to be picked up around 2.5″ in the front to sit level without any load in the bed.

Sponsored

 

[Rousseb90]

I haven’t seen pricing posted anywhere yet. I’m either getting them or the Foutz kit.

 

[Rousseb90]

Also looks to be adjustable in lift height.

 

[Hyperbolic_1]

This is the leveling kit I plan to order (whenever I actually get my RR that has been built since 3/6). The major selling point for me, as @Rousseb90 pointed out, is they're adjustable, which affords the ability to tweak front ride height if and when I get a topper. Now if ARB would actually start offering their Ascent topper Stateside...

 

[davidfigs]

I've used RPG in the past on my gen 2 and loved em. I'm on the same boat as others, either RPG or foutz. TBD

 

[Deepsea619]

RPG Off-Road Ranger Raptor spring perch collar kit (US). Looks like they are approved both by Ford Performance & Fox.

I seen pricing at $395.00

who's getting these?

https://www.rpgoffroad.com/product/ranger-raptor-us-spring-perch-collar-kit/

So does this collar just lift the front so it’s more level than the back?
That’s one thing I can’t stop staring at on my truck, how slammed the front is compared to the back. If this fixes that I am all over it. I can’t wait to see the collar painted with RPG And the flag on it.

 

[CherryCoke]

I haven’t seen pricing posted anywhere yet. I’m either getting them or the Foutz kit.

I sent them an email, looks like they have not decided on pricing yet. I'm waiting to see if we could start a group buy on this.

 

[coryyyy]

I sent them an email, looks like they have not decided on pricing yet. I'm waiting to see if we could start a group buy on this.

I would be interested in a group buy.

 

[CherryCoke]

I would be interested in a group buy.

Just waiting on details from them to see if we can start one. i'll probably start a new thread once they confirm.

 

[CherryCoke]

Started the group buy thread.

(edit) Accidently put it under steering/chassis hahah. Admin fix please. haha


https://www.ranger6g.com/forum/threads/group-buy-rpg-off-road-spring-perch-collar-kit.10438/

 

[CherryCoke]

So does this collar just lift the front so it’s more level than the back?
That’s one thing I can’t stop staring at on my truck, how slammed the front is compared to the back. If this fixes that I am all over it. I can’t wait to see the collar painted with RPG And the flag on it.

Pending response from RPG if they work for the rear as well.

 

[galion]

RPG Off-Road Ranger Raptor spring perch collar kit (US). Looks like they are approved both by Ford Performance & Fox.

I seen pricing at $345 - $395

who's getting these?

https://www.rpgoffroad.com/product/ranger-raptor-us-spring-perch-collar-kit/

I haven't found any official documentation where Fox or Ford Performance approve the use of a perch collar on a highly tuned Raptor suspension, which I believe is highly unlikely, unless it involves revalving in a laboratory setting. From my personal experience, when I briefly ran RPG adjustable collars on my F150 Raptor, I didn't like it as the ride was noticeably stiffer. I find that the Ranger Raptor already has a firm ride, especially when compared to the soft stock ride that my F150 had. I opted to install a 15mm top spacer on my Ranger Raptor to avoid compromising the suspension geometry too much. The result was a 1" lift, and the ride quality remains exactly the same as stock, with the stance being perfect.

 

[Arsenall11]

What perch kit did you go with?

 

[nikhsub1]

I haven't found any official documentation where Fox or Ford Performance approve the use of a perch collar on a highly tuned Raptor suspension, which I believe is highly unlikely, unless it involves revalving in a laboratory setting. From my personal experience, when I briefly ran RPG adjustable collars on my F150 Raptor, I didn't like it as the ride was noticeably stiffer. I find that the Ranger Raptor already has a firm ride, especially when compared to the soft stock ride that my F150 had. I opted to install a 15mm top spacer on my Ranger Raptor to avoid compromising the suspension geometry too much. The result was a 1" lift, and the ride quality remains exactly the same as stock, with the stance being perfect.

Yes but the spacer does alter geometry... as they say, there is no free lunch.

 

[galion]

Yes but the spacer does alter geometry... as they say, there is no free lunch.

That's why I installed a small 15mm spacer for a 1" front lift, which I find sufficient. I don't consider myself an expert in suspensions; my comment is personal based on my experience with my F150 Raptor and perch collars. The suggestion to install a strut spacer as small as possible came from a guy who tunes suspensions for King Shocks on racing cars as a way to minimize any contingencies once alternatives were considered. As you said, "There is no free lunch"

Sponsored