Ikamper DLX Mini

[Nathanm22287]

Hey guys I’m super stoked to be working on my build and I need some help sealing the deal on some bed rack bars. I am currently looking at the 6” Billiebars but am super interested in the 11”. The Ikamper DLX Mini is 13 1/2” at its highest point and 6 1/2” at the shortest. I’m wanting to keep it around the roof level which is 18” from the Tslots of my Retrax cover to the top of the cab. Question is do any of you have a similar setup I could see? I’m having trouble finding more than a few to check out. TIA!

Sponsored

 

[Arsenall11]

Not an exact but very close. These are telescopic from 12” to 20”.

 

[Einhander]

I jusssttt purchased a mid height bed rack from CaliRaisedLED with the intention of mounting my iKamper Mini on top of it and trying to keep it roughly cab height. I'm going to try and install it tomorrow so if all goes well i'll show you how it looks

https://caliraisedled.com/products/2019-2021-ford-ranger-overland-bed-rack

the bed rack in question

 

[SurfRanger]

Hey guys I’m super stoked to be working on my build and I need some help sealing the deal on some bed rack bars. I am currently looking at the 6” Billiebars but am super interested in the 11”. The Ikamper DLX Mini is 13 1/2” at its highest point and 6 1/2” at the shortest. I’m wanting to keep it around the roof level which is 18” from the Tslots of my Retrax cover to the top of the cab. Question is do any of you have a similar setup I could see? I’m having trouble finding more than a few to check out. TIA!

I had billie bars on my 5g with tent risers and gfc superlite. Made it pretty much exactly roof height and i really liked the billie bars just as an fyi. I also had a soft tonneau cover under the bars with just enough room to roll it all the way to the front. Just another idea for you if the measurements arent adding up perfectly you can look at tent risers.

 

[Matt77]

Went with an Amazon brand of bars. Chopped off 6 inches of length because they stuck out too much. They are a little over 6 inches tall and the tonneau can be rolled up, but not easily.

 

[E40]

Go Rhino Cross bar is a pretty decent set up

 

[Nathanm22287]

Go Rhino Cross bar is a pretty decent set up

Awesome setup. Thanks

Go Rhino Cross bar is a pretty decent set up

Awesome setup! Thank you so much for the response.

 

[Nathanm22287]

Went with an Amazon brand of bars. Chopped off 6 inches of length because they stuck out too much. They are a little over 6 inches tall and the tonneau can be rolled up, but not easily.

Great setup! I think I’m sold on low profile bars for my tent!

 

[Nathanm22287]

I had billie bars on my 5g with tent risers and gfc superlite. Made it pretty much exactly roof height and i really liked the billie bars just as an fyi. I also had a soft tonneau cover under the bars with just enough room to roll it all the way to the front. Just another idea for you if the measurements arent adding up perfectly you can look at tent risers.

I have already purchased and installed the Retrax Pro XR with T-Slots. I love the cover now I think it’s time to just buy the Billiebars. Thanks for the comment!

 

[Nathanm22287]

Not an exact but very close. These are telescopic from 12” to 20”.

Haven’t seen those yet. Who makes them?

 

[Nathanm22287]

Here is my truck with the bedcover installed. After all the helpful comments it looks like soon it will have the Billiebars with an Ikamper DLX Mini.

 

[Icemilkteaa]

I have the DLX mini mounted to a bed rack mounted to my tonneau cover

 

[Mystic]

Here is my truck with the bedcover installed. After all the helpful comments it looks like soon it will have the Billiebars with an Ikamper DLX Mini.

Billie is a great lightweight choice...I've done some STUPID things offroad with my Billie setup and its been awesome.

Sponsored