New 2024 Ranger FX4 on 35’s + Bronco Badlands Beadlock Capable Wheels

[@Robby887]

Just picked up last week. Put a 3” front level lift from www.Fordrangerlifts.com and added 315/70/17 Big Bronco Badlands factory beadlock capable wheels. Working on designing and building a prototype front bumper that will be winch ready and plenty strong. Will post pictures once fabricated.

Sponsored

 

[HHIRAP]

Looks great!

 

[tubingchamp]

wooooooooooooooooow

 

[quickstang1]

Those are actually the Bronco Sasquatch/Wildtrak wheels.

If you want black Ford center caps these work on those wheels. That’s what I used.

https://www.ebay.com/itm/276337363865

 

[Oreo_Five8]

Just picked up last week. Put a 3” front level lift from www.Fordrangerlifts.com and added 315/70/17 Big Bronco Badlands factory beadlock capable wheels. Working on designing and building a prototype front bumper that will be winch ready and plenty strong. Will post pictures once fabricated.

So 3in front leveled it out? I was looking at the 2 in front 1 in rear, but this looks great.

 

[Iowa Ranger FX$]

Damn, that looks great!

 

[Fix4Dirt]

Just picked up last week. Put a 3” front level lift from www.Fordrangerlifts.com and added 315/70/17 Big Bronco Badlands factory beadlock capable wheels. Working on designing and building a prototype front bumper that will be winch ready and plenty strong. Will post pictures once fabricated.

Looks great! How is the power with the 34.5? 2.3 or 2.7? Im considering someday 33s, but I can be convinced to go to 35s! Does it rub any?

 

[@Robby887]

Looks great! How is the power with the 34.5? 2.3 or 2.7? Im considering someday 33s, but I can be convinced to go to 35s! Does it rub any?

So 3in front leveled it out? I was looking at the 2 in front 1 in rear, but this looks great.

yes the 3” makes it almost level. Still has about 1/2” front rake.

 

[@Robby887]

Looks great! How is the power with the 34.5? 2.3 or 2.7? Im considering someday 33s, but I can be convinced to go to 35s! Does it rub any?

Power is great with the 2.3. No rubbing. I removed the rear crash bar piece. I left the front crash bar in and just trimmed the carpet felt up just flush with the top of the crash bar. Used a couple zip ties to pull the carpet felt back and tight.

 

[@Robby887]

Power is great with the 2.3. No rubbing. I removed the rear crash bar piece. I left the front crash bar in and just trimmed the carpet felt up just flush with the top of the crash bar. Used a couple zip ties to pull the carpet felt back and tight.

 

[K_teven]

Just picked up last week. Put a 3” front level lift from www.Fordrangerlifts.com and added 315/70/17 Big Bronco Badlands factory beadlock capable wheels. Working on designing and building a prototype front bumper that will be winch ready and plenty strong. Will post pictures once fabricated.

Looking good!!

Sponsored